Keuco Glue set no. 1 custom shower shelf / shower basket from Keuco

keuco Glue set No. 1 for the shower basket - custom shower shelf and toilet paper holder glass shelf.

The custom shower basket and shower shelf are optionally available with a self-adhesive mounting, eliminating the need for drilling.

Glue set number 1 consisting of:
1 x adhesive packaging
2 x mounting plate with nuts

Each glue set is sufficient for two fixing points and
In addition to the accompanying products, a custom shower basket and / or shower shelf must be ordered,
if you want to glue instead of screws.

Depending on the surface conditions, the KEUCO adhesive sets allow the following shower basket and shower shelf to be glued to size instead of screwing.
This type of installation keeps the substrate undamaged.
The adhesive is resistant to water, weather influences and aging and can be removed at any time without leaving any residue.

You can use the glue set number 1 for the following products:

• Shower basket
  24954.51000 and 24954.370000
• Shower shelf 320mm
  24952.510000 and 24952.370000
• Custom shower shelf 400mm - 600mm
  24953.510100 and 24953.370100
  Has 2 attachment points. 1x Glue set 1 required.
• Custom shower shelf 610mm - 800mm
  24953.510200 and 24953.370200
  Has 3 attachment points. 2x Glue set 1 required.
• Custom shower shelf 810mm - 1000mm
  24953.510300 and 24953.370300
  Has 3 attachment points. 2x Glue set 1 required.
• Toilet paper holder with glass shelf 19073.0180000.

Assembly steps for the Glue set:

1. Clean the adhesive surface of the mounting plate and the surface of the
   tile thoroughly with the i.CLEANER Cleaning Cloth.
2. Fold the glue chamber over and push the glue in the direction of the narrow one
   reaction chamber, until the dividing line bursts open.
3. Push the glue by rolling it up into the reaction chamber.
   Mix the glue in this chamber with the reagent.
4. Cut open the bag and add hazelnut size to it
   center of the mounting plate. Use cardboard if necessary
   fixation.
5. Press the mounting plate and let it harden for 4 hours. Remove adhesive residue
   then carefully and install the accessory.

Keuco Glue Set 1 download assembly operation.

Source: YouTube - Keuco